STRONG SAESHIN B200/H325 with Battery (White) (30,000 rpm)

Strong B200/H325
A professional device for manicures, pedicures, and nail extensions, featuring the H325 handle.
Model features:

• High-quality 30K carbon-fiber handle
• A small and lightweight handle
• Speed and Battery Level Display
• Vibration-free and quiet operation
• Automatic Overload Protection System
• Forward/Reverse Poga
• Battery life of up to 8 hours
• Charges for up to 2.5 hours

Warranty: 12 months for the control unit and 6 months for the handle.

Handle Specifications:

• Rotational speed: up to 30,000 rpm
• Dimensions: 119 x 20 mm
• Weight: 153 g
• Torque: 3.0 N

Block specifications:

• Weight: 356 g
  

Beware of counterfeit and contraband goods!

Characteristics of original products:

• Certificate
  Before making a purchase, be sure to ask the retailer for a certificate of conformity.

• Warranty Period
  Original Saeshin products come with a 12-month warranty.

• Manufacturer's engraving
  The name, model, and serial number are engraved on the handle housing. The markings must be clearly legible.

• Power cord
  Genuine devices from South Korea have one of the following inscriptions on the power cord: KOREA CORD CO., LTD. or DONG YANG.

• Company sticker
  The original device casing features a special information label on the bottom of the device. Check that the font, proportions, and icons are correct.

• Design
  Make sure that the shape of the housing, the color scheme of the base and handle, and the fonts used in the selected model comply with the official specifications.

USE AND MAINTENANCE:

• Change the direction of rotation to theoppositedirection (reverse)ONLY after the motor has COME TO A COMPLETE STOP,andthen switch theFWD/REV button.
• Always bring the machine to a complete stopbeforechanging the cutter head!
• The diameter of the milling cutter shankis2.35 mm, and its minimum length is10 mm.
• Do not userusted or damaged drill bits; this can cause the micromotor's bearingsto wear out quickly.
• Do not install a wet or dusty drill bit on the micromotor.
• ALWAYS STORE THE MICROMOTOR WITH THE CUTTING BIT INSTALLED.
• Avoid damaging the device.
• NEVER turn on the micromotor without a cutter or nozzle attached!
• NEVER IMMERSE OR WASH THE MICROMOTOR!

WHAT TO DO:

Every day after finishing work, you must:

• Wipe dustoffthe exterior of the device with a soft cloth, using alcohol-based cleaning solutions or a vacuum cleaner.
• Clean the open nozzlewitha brush.
• Performregular maintenance periodically:cleaning, adjustments, brush replacement, and so on.
• The frequency of cleaningdependson how often the equipment is used and the conditions under which it is used.
• The recommended frequency for professional use isat least once every three months.
• Cleaning must be performed by a qualified technician!
• If you notice any initial signs of malfunction, contact the Nailinfinity service center immediately.